Introduction
EVD strives to provide the highest quality technology in simple to install, easy
to use packaging. The VC-1 demonstrator exemplifies this philosophy,
providing the benefits of sophisticated image enhancement techniques in a truly
"Plug and Play" package.
Of course, real world conditions vary widely, and the ability to tailor any
video processor's output to specific needs is a critical one. The VC-1
demonstrator accomodates this need at two levels: changing the Power-up Mode Settings,
and Storing Custom User Settings.
This section describes the steps necessary to
select VC-1 Default Power-up Mode Settings. Use the scroll bar at right to view each
page's entire content and the menu buttons in the "LINKS" section at left to view all
documents. Note the entire instruction set is available for download in PDF format.
VC-1 Power-up Mode Settings
When the VC-1 Demonstrator is powered on, it automatically loads the Default
settings. These settings persist when the unit is powered off, and remain
in effect until they are changed as described in this document.
Operating Mode
To facilitate the demonstration process, the VC-1 provides the ability to operate in
one of three modes, as defined in the following table:
Table 1: VC-1 Operating Modes
| Mode |
Description |
| Full Screen |
The entire display screen is enhanced per the current LEVEL setting |
| Split Screen |
the RIGHT half of the display screen is enhanced per the current
LEVEL setting, while the LEFT half of the screen shows the original, unenhanced
video |
| Bypass |
The entire display screen shows the original, unenhanced video |
Enhancement Level
In addition to the operating modes defined above, the VC-1 may be set to one of
three pre-defined enhancement levels Low, Medium, or High. As the names
imply, these three settings offer increasingly strong enhancement of the
incoming video signal. The selection of which setting to use is dependent
upon the application and desired results.
Selecting the desired Default Mode and Enhancement Level is a simple process, and is outlined via the
step-by-step instructions included in this document.